Incremental encoder for encoder  

Hollow shaft encoder installation: To avoid rigid connection with the encoder, leaf springs should be used. During installation, the encoder should be gently pushed into the sleeve shaft, and it is strictly forbidden to strike it with a hammer to avoid damage to the shaft system and code disc. For long-term use, please check whether the leaf spring is loose relative to the encoder; whether the screws of the encoder are loose Electrical parameters Resolution 10-5000P/R 10-5000P/R Circuit characteristics Current type (C) Voltage type (E) Voltage DC(5-30)V DC(5-30)V Current consumption 80mA Max. 100mA Max. Signal high level VH＞Vcc-0.7V VH…